Table of Contents
Advertisement
TRENDnet User's Guide
interface, this entry replaces the address in the
configuration.
Link Local
Enter the Link Local Address/Prefix Length.
Address/Prefix
length:
A link-local address is an IPv6 unicast address that can be automatically
configured on any interface using the link-local prefix FE80/10 and the
interface identifier in the modified EUI-64 format. Link-local addresses
are used in the neighbor discovery protocol and the stateless auto
configuration process. Nodes on a local link can use link-local addresses
to communicate; the nodes do not need globally unique addresses to
communicate. IPv6 devices must not forward packets that have link-local
source or destination addresses to other links.
Click Apply to apply the change to the switch.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent
© Copyright 2015 TRENDnet. All Rights Reserved.
TPE-4840WS
14
Advertisement
Table of Contents
