Table of Contents
Advertisement
TRENDnet User's Guide
Set GVRP port settings
Bridge > GVRP > Port Settings
This section will allow you to select which ports will have GVRP enabled
or will be restricted from using GVRP.
GVRP Port Settings
Port: The port number on the switch.
Dynamic Vlan
This parameter defines the GVRP status of the port.
Status
From the Dynamic Vlan Status field, select one of the
following choices from the pull-down menu:
Ignore: This parameter indicates that the setting
in the All row does not apply to the Dynamic Vlan
© Copyright 2015 TRENDnet. All Rights Reserved.
Status field. In other words, each port is set
individually.
Enabled: The Dynamic Vlan is activated for the
port row selected.
Disabled: The Dynamic VLAN is de-active for the
respective port.
Restricted
This parameter controls if the VLAN registration on
VLAN
the port is restricted or not.
Registration
Ignore: This parameter indicates that the setting
in the All row does not apply to the Restricted
VLAN Registration field. In other words, each port
is set individually.
Enable: The Restricted VLAN Registration is
active for the port row selected.
Disable: The Restricted VLAN Registration is de-
active for the port row selected.
Action: Modifying settings in the row marked All, will apply
the settings to all ports. Click Apply to apply the
change.
TPE-4840WS
55
Advertisement
Table of Contents
