Table of Contents
Advertisement
TRENDnet User's Guide
Configure Binding Database
DHCP Snooping > Binding Database
The Binding Database displays learned and statically assigned MAC
Address and IP Address information for each host on the local area
network. Dynamically assigned IP addresses from the DHCP server will
automatically populate the table on the Binding Database page as they are
assigned by the server. Statically assigned IP addresses are entered
manually by entering the host's address information and clicking on the
Add button.
Binding Database Settings
MAC Address: Enter the host's MAC Address.
IP Address: Enter the static IP Address assigned to the host.
VLAN: Enter the host's VLAN ID.
© Copyright 2015 TRENDnet. All Rights Reserved.
Port: Enter the port number where the host is connected.
Type: Because the IP Address being entered is static, you
must select Static.
Lease Time: Enter the time that IP address assignment is valid.
The range is 10 to 4294967295 seconds.
Click Add to add the database entry to the table.
On the list, you can click Modify to modify an entry or click Delete or
delete the entry. You can also click Delete All to delete all of the entries in
the table. If the entries span multiple pages, you can navigate page
number in the Page field and click Go or you can click First, Previous,
Next, and Last Page to navigate the pages.
Binding Database Table
MAC Address: This parameter shows the host's MAC Address.
VLAN ID: This parameter shows the host's VLAN ID of which
the DHCP client is a member.
IP Address: This parameter is the IP Address assigned by the
DHCP server to the DHCP client.
Port: This parameter is the port number where the DHCP
client is connected.
Type: This parameter indicates the following:
Learned:
•
dynamically assigned by the DHCP server.
Static: The host IP Address is statically
•
assigned. See "Static IP Addresses" on page
300 for more information.
Lease Time: This parameter is the time that IP address
assignment by the DHCP server is valid.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
The
host
IP
Address
is
99
Advertisement
Table of Contents
