Table of Contents
Advertisement
TRENDnet User's Guide
Configure Spanning Tree Protocol MST settings (MSTP)
Bridge > Spanning Tree > MST Settings
MST Configuration Identification Settings
Configuration
A configured name set on the switch to uniquely
Name:
identify the MSTI (Multiple Spanning Tree
Instance). If a configuration name is not set, this
field shows the MAC address of the device running
MSTP.
Revision Level: This value, together with the configuration name,
and identical VLAN mapped for STP instance IDs
identifies the MST region configured on the switch.
Range: 0 to 65535.
Click Apply to apply the change to the switch
© Copyright 2015 TRENDnet. All Rights Reserved.
MST Instance Settings
MSTI ID: Displays the MSTI ID associated with the VLAN ID.
Range: 1 to 31.
VID List: Displays the VLAN ID associated with MSTI. Click
Add to add the VLAN and MSTI association on MST
table. Range: 0 to 4094.
Priority: Select a priority in the Priority field. The user may
set a priority value between 0 and 61440.
MST Table
MSTI ID: Displays the MSTI ID associated with the VLAN ID.
VID List: Displays the VLAN ID associated with MSTI. Click
Apply to change the VID List value on an entry.
Range: 0 – 4094.
Priority: Select a priority in the Priority field. The user may
set a priority value between 0 and 61440. Click
Apply to apply the change.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
31
Advertisement
Table of Contents
