Table of Contents
Advertisement
TRENDnet User's Guide
Add IPv6 neighbors
System > IPv6 Neighbor Settings
These settings allows you to manually define IPv6 supported neighboring
devices on your network.
IPv6 Neighbor Settings
Neighbor IPv6
Specifies the neighbor IPv6 address.
Address:
Link Layer MAC
Specifies the link layer MAC address.
Address:
Click Add to save the entry to the list.
You can type in the specific address and click Find to find the entry to
modify or click Delete to delete the address. If the entries span multiple
pages, you can navigate page number in the Page field and click Go or you
can click First, Previous, Next, and Last Page to navigate the pages.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
© Copyright 2015 TRENDnet. All Rights Reserved.
DNS Settings
System > DNS Settings
Some of the smart switch services requires name resolution services to
finish its job, such as SNTP service. Setup the DNS server settings here for
name resolution.
DNS Server Settings
DNS IPv4
Specifies the IPv4 DNS server address.
Server:
DNS IPv6
Specifies the IPv6 DNS server address.
Server:
Click Add to save the entry to the list.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
15
Advertisement
Table of Contents
