TRENDnet User's Guide
To reset your switch to factory defaults:
To reset the switch configurations to factory defaults you can proceed
with hardware reset-to-default, or with the web GUI. Hardware reset has
the same effect to "reboot the switch to factory default" selection in this
session.
Hardware Reset-to-Default: Using a paper clip, on the front
•
panel of the switch, push and hold the Reset button more than 10
seconds and then release. Located on the front panel of your
switch. Wait for the switch complete the rebooting process.
Reset
Button
With Web GUI: You can choose reset to Factory Default or
•
Factory Default Except IP. If you select Factory Default Except
IP, all the configurations will be set to the factory defaults, but the
switch management IP remains the same.
© Copyright 2015 TRENDnet. All Rights Reserved.
Default Settings
Management IP: 192.168.10.200
Admin user name: admin
Password: admin
TPE-4840WS
111