Table of Contents
Advertisement
TRENDnet User's Guide
View your Spanning Tree Protocol Instance Information (MSTP)
Bridge > Spanning Tree > Instance Information
Instance Information
MSTI ID: Specifies the ID of MSTI.
Internal Root
Root cost to the root bridge
Cost:
Root Port: Root port of the specific instance.
Regional Root
The bridge connected with root port.
Bridge:
Designated
The bridge connected with designated port.
Bridge:
Instance
Priority of the instance.
Priority:
© Copyright 2015 TRENDnet. All Rights Reserved.
Configure Spanning Tree Protocol MST Port Settings (MSTP)
Bridge > Spanning Tree > MST Settings
MST Port Settings
Select MST
Click the drop-down list to select which MST port to
Port:
configure.
MST Port Info
MSTI ID: MSTI identification number
Designated
The bridge connects to the designated ports.
Bridge:
Internal Path
The path cost to the designated bridge.
Cost:
Admin Path
This is the port cost used by MSTP when calculating
Cost
path cost to the root bridge.
(0 = Auto):
Priority: This is the port priority used by MSTP in calculating
path costs when two ports on the switch have the
same port cost.
State: STP port fording state
Role: The port role in the STP: root port, designated port,
backup port, or disabled port.
Action: Click Apply to apply the change to the MST port
TPE-4840WS
32
Advertisement
Table of Contents
