Table of Contents
Advertisement
TRENDnet User's Guide
Access Control Config
Access Control configuration allows you to control different aspects of the
Ethernet traffic as it enters the switch ports and is process through the
Switch. You can specify what traffic is permitted or denied to flow through
the switch by setting up specific filter criteria at an ingress port. You can
also manage the switching priority of Ethernet packets. All of this is done
by specifying policies that define the filtering and priority behavior.
© Copyright 2015 TRENDnet. All Rights Reserved.
Configure Policy Settings
Access Control Config > Policy Settings
The Policy Settings page allows you to specify the filtering criteria for one
policy. You can create, modify or delete a Policy by following the
procedures in the following sections:
Choose the type of policy to create:
Add L2+IPv4
Add IPv6
Note: Please note that when adding polices, it is important to note that the
rule/policy order of priority in which the rules/policies are evaluated by the switch,
one (1) being the highest priority.
TPE-4840WS
71
Advertisement
Table of Contents
