Table of Contents
Advertisement
TRENDnet User's Guide
Mirroring
Configure port mirror settings
Bridge > Mirroring
Port mirroring allows you to monitor the ingress and egress traffic on a
port by having the traffic copied to another port where a computer or
device can be set up to capture the data for monitoring and
troubleshooting purposes.
© Copyright 2015 TRENDnet. All Rights Reserved.
Mirroring Settings
Status: Click the drop-down menu and select one of the
following options:
Enabled: This parameter activates the Port
Mirroring feature and the rest of the configuration
parameters become active on the page.
Disabled: This parameter de-activates the Port
Mirroring feature and the rest of the configuration
parameters become inactive on the page.
Mirror Target
Click the drop-down and list and select the port to
Port:
send the copied ingress/egress packets/data. (e.g.
Computer or device with packet capture or data
analysis program.)
Mirroring Port Settings
Ingress Port: To copy data received on a specific port, check the
port number(s) under the Ingress Port section or
you could click All to copy data received on all ports.
Egress Port: To copy data transmitted on specific port, check the
port number under the Egress Port section or you
could click All to copy data transmitted on all ports.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
37
Advertisement
Table of Contents
