Table of Contents
Advertisement
TRENDnet User's Guide
Backup and restore your switch configuration settings
Tools > Config File Backup/Restore
You may have added many customized settings to your switch and in the
case that you need to reset your switch to default, all your customized
settings would be lost and would require you to manually reconfigure all
of your switch settings instead of simply restoring from a backed up
switch configuration file.
Backup/Restore via HTTP Settings
Click Backup to save the configuration file (config.bin) to your local hard
drive.
Note: If prompted, choose the location on your local hard drive. If you are not
prompted, the configuration file (config.bin) will be saved to your default
downloads folder.
© Copyright 2015 TRENDnet. All Rights Reserved.
To restore your switch configuration:
1. Depending on your web browser, click on Browse or Choose File.
2. A separate file navigation window should open.
3. Select the configuration file to restore and click Restore. (Default
Filename: config.bin). If prompted, click Yes and then OK.
4. Wait for the switch to restore settings.
Backup/Restore via TFTP Settings
Note: Before using this method, a TFTP server is required alive on the network. The
TFTP server has to be in the same subnet. Please place the firmware file (.hex) on
the root directory of your TFTP server. If you are not familiar with the TFTP
protocol, it is recommended to use the HTTP method.
1. Make sure your TFTP server is running and note the IP address of
your server and firmware file name. The TFTP server should be in
the same IP subnet as the switch.
TPE-4840WS
107
Advertisement
Table of Contents
