Table of Contents
Advertisement
TRENDnet User's Guide
Switch Information
System Up For: The duration your switch has been running
continuously without a restart/power cycle (hard
or soft reboot) or reset.
Runtime Image: The current software or firmware version your
switch is running.
Boot Loader: The current boot loader version your switch is
running.
Hardware Information
DRAM Size: Displays your switch RAM memory size.
Flash Size: Displays your switch Flash memory size.
Administration Information
System Name: Displays the identifying system name of your
switch. This information can be modified under
the System section.
System
Displays the identifying system location of your
Location:
switch. This information can be modified under
the System section.
System Contact: Displays the identifying system contact or system
administrator of your switch. This information
can be modified under the System section.
System MAC Address, IPv4 Information
MAC Address: Displays the switch system MAC address.
IP Address: Displays the current IPv4 address assigned to
your switch.
Subnet Mask: Displays the current IPv4 subnet mask assigned
to your switch.
Default
Displays the current gateway address assigned to
Gateway:
your switch.
© Copyright 2015 TRENDnet. All Rights Reserved.
IPv6 Information
IPv6 Unicast
Displays the current IPv6 address and prefix
Address / Prefix
assigned to your switch.
Length:
IPv6 Default
Displays the current IPv6 default gateway
Gateway:
address assigned to your switch.
Link Local Address
Displays the current Link Local address and
/ Prefix Length:
prefix length assigned to your switch.
Automatic Network Features
IPv4 DHCP
Displays if your switch IPv4 address setting is set
Client Mode:
to DHCP client.
IPv6 DHCP
Displays if your switch IPv6 address setting is set
Client Mode:
to DHCP client.
TPE-4840WS
10
Advertisement
Table of Contents
