Table of Contents
Advertisement
TRENDnet User's Guide
Firmware Upgrade via HTTP Settings
1. Depending on your web browser, in the Upload Firmware
section, click Browse or Choose File.
2. Navigate to the folder on your computer where the unzipped
firmware file (.hex) is located and select it.
3. Click Apply. If prompted, click Yes and then OK.
© Copyright 2015 TRENDnet. All Rights Reserved.
Firmware Upgrade via TFTP Settings
Note: Before using this method, a TFTP server is required alive on the network. The
TFTP server has to be in the same subnet. Please place the firmware file (.hex) on
the root directory of your TFTP server. If you are not familiar with the TFTP
protocol, it is recommended to use the HTTP method.
Firmware Upgrade via TFTP Settings
Image Version: The firmware version now is running on the switch.
TFTP Server IP: Enter the IP address of your TFTP server.
Image File
Enter the firmware filename with extension. (.hex)
Name:
Retry Count: Defined the number of time to attempt to pull the
firmware file from the TFTP server.
Click Apply to start the firmware upgrade.
TPE-4840WS
106
Advertisement
Table of Contents
