Table of Contents
Advertisement
TRENDnet User's Guide
TPE-4840WS
To modify a SNMP User and Group Name:
If you need to modify an entry in the SNMP User/Group page, you must
first delete the entry and then re-enter it.
To delete a SNMP User and Group Name:
In the Action column of the table, click Delete for the User Name and
Group Name that you want to remove.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
© Copyright 2015 TRENDnet. All Rights Reserved.
67
Advertisement
Table of Contents
