TRENDnet User's Guide
TPE-4840WS
To modify a SNMP View Name:
If you need to modify an entry in the SNMP Group Access page, you must
first delete the entry and then re-enter it.
To delete a SNMP View Name:
In the Action column of the table, click Delete for the View Name that
you want to remove.
Note: The views corresponding to the ReadOnly and ReadWrite Group Names are
default values and cannot be removed.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
© Copyright 2015 TRENDnet. All Rights Reserved.
65