Table of Contents
Advertisement
TRENDnet User's Guide
Add RADIUS Servers (RADIUS Authentication Method)
Security > RADIUS
RADIUS Settings
Server Priority: Enter the RADIUS Server priority (Highest: 1,
Lowest: 5).
Server IP
Select IPv4 or IPv6 and set the RADIUS server IP
Address:
address and enter the IP address of the RADIUS
server you would like to add.
Server Port: Set the RADIUS authentic server(s) UDP port. The
default port is 1812. Range: 1 – 65535.
Accounting
Set the RADIUS account server(s) UDP port. The
Port:
default port is 1813. Range: 1 – 65535.
Shared Secret: Enter the default authentication and encryption key
for RADIUS communication between the device and
the RADIUS server.
Click Add to add the entry to the table.
© Copyright 2015 TRENDnet. All Rights Reserved.
In the list, you can click Modify to modify an entry or click Delete or
delete the entry.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
.
TPE-4840WS
90
Advertisement
Table of Contents
