Table of Contents
Advertisement
TRENDnet User's Guide
Configure VLAN Port Settings
Bridge > VLAN > Port Settings
In this section, you can modify the port VID settings, acceptable frame
types, and ingress filtering.
Port Settings
Port: The port number.
PVID: Enter the port VLAN ID.
Note: Required for untagged VLAN ports.
Acceptable
Click the drop-down list and select which type of
Frame Type:
frames can be accepted:
All: The port can accept all frame types.
Tagged: The port can accept tagged frames only.
Untagged frames are discarded.
Untagged & Priority Tagged: The port can
accept untagged frames and frames with tagged
priority information only such as 802.1p.
© Copyright 2015 TRENDnet. All Rights Reserved.
Ingress
Click the drop-down list and select Enabled to
Filtering:
enable ingress filtering or Disabled to disable
ingress filtering.
Action: Modifying settings in the row marked All, will apply
the settings to all ports. Click Apply to apply the
change.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
49
Advertisement
Table of Contents
