Table of Contents
Advertisement
TRENDnet User's Guide
Switch Maintenance
Upgrade your switch firmware
Tools > Firmware Upgrade
TRENDnet may periodically release firmware upgrades that may add
features or fix problems associated with your TRENDnet switch model
and version. To check if there is a firmware upgrade available for your
device, please check your TRENDnet model and version using the link.
http://www.trendnet.com/downloads/
In addition, it is also important to verify if the latest firmware version is
newer than the one your switch is currently running. To identify the
firmware that is currently loaded on your switch, log in to the switch, click
on the System Info section or click on Tools and click on Firmware
Upgrade. The firmware used by the switch is listed as Runtime Image or
Image Version. If there is a newer version available, also review the
release notes to check if there were any new features you may want or if
any problems were fixed that you may have been experiencing.
1. If a firmware upgrade is available, download the firmware to your
computer.
2. Unzip the file to a folder on your computer.
Please note the following:
•
Do not interrupt the firmware upgrade process. Do not turn off the
device or press the Reset button during the upgrade.
If you are upgrade the firmware using a laptop computer, ensure
•
that the laptop is connected to a power source or ensure that the
battery is fully charged.
© Copyright 2015 TRENDnet. All Rights Reserved.
Disable sleep mode on your computer as this may interrupt the
•
firmware upgrade process.
•
Do not upgrade the firmware using a wireless connection, only
using a wired network connection.
•
Any interruptions during the firmware upgrade process may
permanently damage your switch.
TPE-4840WS
105
Advertisement
Table of Contents
