Table of Contents
Advertisement
TRENDnet User's Guide
Static Unicast
Add static unicast entries to the switch
Bridge > Static Unicast
Static Unicast Address Settings
802.1Q VLAN: Enter the VLAN ID where the MAC address will
reside.
Note: By default, all switch ports are part of the default
VLAN, VLAN ID 1.
MAC Address: Enter the MAC address of the device to add.
© Copyright 2015 TRENDnet. All Rights Reserved.
Port Member Settings
Port Member: Select the port where the MAC address will reside.
Note: Click Apply to apply the change.
802.1Q VLAN
On the list, you can click Modify to modify an entry or click Delete to
delete the entry. You can also click Delete All to delete all the entries in
the list. If the entries span multiple pages, you can navigate page number
in the Page field and click Go or you can click First, Previous, Next, and
Last Page to navigate the pages.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
40
Advertisement
Table of Contents
