Table of Contents
Advertisement
TRENDnet User's Guide
Configure parameters for RMON Ethernet statistics
RMON > Statistics
You can remotely view individual port statistics with RMON by using your
SNMP NMS software and the RMON portion of the MIB tree.
Ethernet Statistics Settings
Index: This parameter specifies the ID number of the new
group. The range is 1 to 65535.
Port: This parameter specifies the port where you want
to monitor the statistical information of the
Ethernet traffic.
Owner: This parameter is used to identify the person who
created an entry. It is primarily intended for
switches that are managed by more than one
person, and is an optional field.
© Copyright 2015 TRENDnet. All Rights Reserved.
Click Add to add the entry to the table.
On the list, you can click Modify to modify an entry or click Delete or
delete the entry. You can also click Delete All to delete all of the entries in
the table. If the entries span multiple pages, you can navigate page
number in the Page field and click Go or you can click First, Previous,
Next, and Last Page to navigate the pages.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
78
Advertisement
Table of Contents
