Table of Contents
Advertisement
TRENDnet User's Guide
RMON Alarm Settings
Index: This parameter specifies the ID number of the new
group. The range is 1 to 65535.
Interval: This parameter specifies the time (in seconds) over
which the data is sampled. Its range is 1 to
2147483647 seconds.
Variable: This parameter specifies the RMON MIB object that
the event is monitoring.
Sample type: This parameter defines the type of change that has
to occur to trigger the alarm on the monitored
statistic. There are two choices from the pull-down
menu - Delta value and Absolute value. Delta value-
setting compares a threshold against the difference
between the current and previous values of the
statistic. Absolute value- setting compares a
threshold against the current value of the statistic.
Rising
This parameter specifies a specific value or
Threshold:
threshold level of the monitored statistic. When the
value of the monitored statistic becomes greater
than this threshold level, an alarm event is
triggered.
2147483647.
Falling
This parameter specifies a specific value or
Threshold:
threshold level of the monitored statistic. When the
value of the monitored statistic becomes less than
this threshold level, an alarm event is triggered. The
parameter's range is 1 to 2147483647.
Rising Event
This parameter specifies the event index for the
Index:
rising threshold. Its range is 1 to 65535. This field is
mandatory and must match an Event Index that you
previously entered in "Events".
Falling Event
This parameter specifies the event index for the
Index:
falling threshold. Its range is 1 to 65535. This field
is mandatory and must match an Event Index that
you previously entered in "Events".
© Copyright 2015 TRENDnet. All Rights Reserved.
The
parameter's
range
is
Owner: This parameter is used to identify the person who
Click Add to add the entry to the table.
On the list, you can click Modify to modify an entry or click Delete or
delete the entry. You can also click Delete All to delete all of the entries in
the table. If the entries span multiple pages, you can navigate page
number in the Page field and click Go or you can click First, Previous,
Next, and Last Page to navigate the pages.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
1
to
created an entry. It is primarily intended for
switches that are managed by more than one
person, and is an optional field.
TPE-4840WS
81
Advertisement
Table of Contents
