Table of Contents
Advertisement
TRENDnet User's Guide
Configure Voice VLAN OUI settings
Voice VLAN > Voice VLAN OUI Settings
Use the following procedure to configure Voice VLAN OUIs:
•
Enter a text description that helps you identify the manufacturer's
OUI in the User Defined OUI. Description field. This parameter
can be up to 20 characters in length.
Enter the MAC address in the User Defined OUI. Telephony OUI
•
field of one of the IP phones with the manufacturer's OUI.
Click Add. The new OUI entry is displayed in the table at the
•
bottom of the page.
© Copyright 2015 TRENDnet. All Rights Reserved.
Note: If you find more than one OUI among the IP phones you are installing, enter
one MAC address that represents each individual OUI. You can enter a total of 10
OUIs.
Modify OUI Setting
To modify or delete an OUI, it must be first be deleted and then re-created.
Delete OUI Setting
To delete a specific OUI that had already been entered in the table at the
bottom of the page, click on Delete in the Action column of the table. The
specific OUI will be deleted from the table.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
86
Advertisement
Table of Contents
