Table of Contents
Advertisement
TRENDnet User's Guide
Restrict access to switch management page
System > IP Access List
This section allows you to define or restrict access to the switch
management page to a list of specific IP addresses.
IP Access List
IP Restriction
Enable or Disable Access Control List. Default:
Status:
Disabled
IP Address Settings
IP Address: Enter the IPv4 or IPv6 address and then click Add
to create an access list entry.
© Copyright 2015 TRENDnet. All Rights Reserved.
IP Access List Table
For each entry, the access list will populate. You can click Delete next to
the entry to delete the entry or Delete All to delete all entries in the table.
When you have completed entering the IPv4 and IPv6 address entries,
click the IP Restriction Status drop-down list at the top and select
Enabled, then click Apply.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
16
Advertisement
Table of Contents
