Table of Contents
Advertisement
TRENDnet User's Guide
TPE-4840WS
Tagged VLAN ports can be included as members for multiple VLANs.
Computers and other edge devices are not typically connecting to tagged
VLAN ports unless the network interface on these device can be enabled
to be VLAN aware.
Untagged VLAN ports are used to connect edge devices (VLAN unaware)
such as computers, laptops, and printers to a specified VLAN. It is required
to modify the Port VID settings accordingly for untagged VLAN ports
under Bridge > VLAN > Port Settings. (e.g. If the VID for the VLAN is 2, the
PVID should also be set to 2)
Click Apply to set the new VLAN to the table.
Tagged VLAN Table
In the list, you can click Modify to modify an entry or click Delete or delete
the entry. If the entries span multiple pages, you can navigate page
number in the Page field and click Go or you can click First, Previous,
Next, and Last Page to navigate the pages.
Note: VLAN 1 is the default VLAN and cannot be removed.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
© Copyright 2015 TRENDnet. All Rights Reserved.
48
Advertisement
Table of Contents
