Memory List Screen; Selecting A Memory Channel Using The Memory List Screen; D Confirming Programmed Memory Channels - Icom IC-7600 Instruction Manual

■ Memory list screen

The memory list screen simultaneously shows 7
memory channels and their programmed contents.
13 memory channels can be displayed in the wide
memory list screen.
You can select a desired memory channel from the
memory list screen.
D Selecting a memory channel using the memory list screen
q Push [EXIT/SET] several times to close any multi-
function screens.
w Push [MEMORY] (F-4) to select the memory list
screen.
to
• Push [WIDE] (F-6) switch between the standard and
wide screens.
e While holding down [SET] (F-2), rotate the main
dial to select the desired memory channel.
• [∫] and [√] can also be used.
r Push [EXIT/SET] to exit the memory list screen.

D Confirming programmed memory channels

q Select the memory list screen as described above.
w While pushing [ROLL] (F-1), rotate the main dial to
scroll the screen.
e Push [SET] (F-2) to select the highlighted memory
channel.
• "≈" appears beside the selected memory channel
number in the memory list screen and the selected
memory channel contents are displayed below the
frequency readout.
r Push [EXIT/SET] to exit the memory list screen.
MEMORY OPERATION
F-2 F-4
SET MEMORY
• Memory list screen
F-1 F-2
EXIT/SET
ROLL SET
6
WIDE
F-6
Main dial
EXIT/SET
Main dial
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
108