Memory Operation; Memory Channels; Memory Channel Selection; D Using The [∫]/[√] Keys - Icom IC-7600 Instruction Manual

6

MEMORY OPERATION

■ Memory channels

The transceiver has 101 memory channels. The
Memory mode is very useful to quickly change to
often-used frequencies.
MEMORY
CHANNEL
Regular memory
channels
Scan edge
memory
channels

■ Memory channel selection

D Using the [∫]/[√] keys
q Push [VFO/MEMO] to select the memory mode.
w Push [∫]/[√] several times to select the desired
memory channel.
• Hold down [∫]/[√] for continuous scrolling.
• [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [VFO/MEMO] again.

D Using the keypad

q Push [VFO/MEMO] to select the memory mode.
w Push [F-INP ENT].
e Enter the desired memory channel number using
the keypad.
• Enter 100 or 101 to select scan edge channel P1 or
P2, respectively.
r Push [∫] or [√] to set the memory channel.
[EXAMPLE]
To select memory channel 3:
Push [F-INP ENT], [7 3], then push [∫] or [√].
➥
To select memory channel 12:
[F-INP ENT], [1.8 1], [3.5 2], then push [∫]
Push
➥
or [√].
To select the scan edge channel P1:
Push [F-INP ENT], [1.8 1], [50 0], [50 0], then
➥
push [∫] or [√].
To select the scan edge channel P2:
[F-INP ENT], [1.8 1], [50 0], [1.8 1], then
Push
➥
push [∫] or [√].
107
MEMORY
CHANNEL CAPABILITY
NUMBER
One frequency and one mode in each
1–99
memory channel.
One frequency and one mode in each
P1, P2 memory channel as scan edges for
programmed scan.
All 101 memory channels are tunable, which means
the programmed frequency can be tuned temporarily
with the main dial, etc. in memory mode.
TRANSFER
TO VFO
Yes
Yes
OVER-WRIT-
CLEAR
ING
Yes Yes
Yes No
VFO/MEMO
Keypad
F-INP
ENT
VFO/MEMO