Screen Saver Function; Opening Message - Icom IC-7600 Instruction Manual

10
SET MODE
Display set mode (Continued)
■
APF−Width Popup (APF OFF➔ON)
Selects the pop-up display for the APF filter width
from ON or OFF. (default: ON)
MN−Q Popup (MN OFF➔ON)
Enables the pop-up display capability when the
notch filter width is changed from ON to OFF.
(default: ON)

Screen Saver Function

Turns the screen saver function ON (15, 30 or 60
minutes) and OFF. (default: 60 min.)
The screen saver will activate when no operation is
performed for the selected time period to protect the
LCD from the "burn-in" effect.
Screen Saver Type
Selects the screen saver type from "Bound,"
"Rotation" and "Twist." (default: Bound)
The screen saver pattern can be displayed for your
reference while holding down [PREVIEW] (F-5).

Opening Message

Turns the opening message screen display
capability ON or OFF. (default: ON)
My Call
Sets the introductory text, up to 10-character long,
displayed in the opening screen.
Usually, you set your call sign for the opening
screen.
Capital letters, numerals, some symbols (– / . @)
and spaces can be used.
When a keyboard is connected to the [USB]
connector on the front panel, the call sign can also
be edited from the keyboard.
135
ON
ON
60min
Bound
ON
z Push [EDIT] (F-5) to select the name edit
condition.
• The cursor under the 1st character blinks.
x Push [ABC] , [123]
(MF6)
to select the character group, then rotate the main
dial to select the character.
• Push [123] or [Symbol]
(MF7)
and symbols.
• Push [Ω] (F-1) or [≈] (F-2) for cursor movement.
• Push [DEL] (F-3) to delete the selected character.
• Push [SPACE] (F-4) to input a space.
• Pushing the transceiver's keypad, [0]–[9] and [.] can
also enter numerals.
c Push [EXIT/SET] to set the name.
or [Symbol]
(MF7) (MF7)
to toggle numerals
(MF7)