D Memory Keyer Screen - Icom IC-7851 Instruction Manual

5
RECEIVE AND TRANSMIT
■
Electronic keyer functions (Continued)

D Memory keyer screen

Preset characters can be sent using the Memory keyer
screen. Contents of the memory keyer are entered in
the Keyer edit screen.
• Transmitting
 The Multi-function screens are OFF:
q
Push the Mode key [CW].
w
Push [KEYER](F).
• The Memory keyer screen is displayed.
e
Push [1–4/5–8] to select the Memory bank.
• M5 ~ M8 are blank by default, edit the contents to use
these memories.
r
Push [TRANSMIT], or turn ON the Break-in function
(p. 8-4).
t
Push one of the function keys [M1] ~ [M4] or [M5]~
[M8].
• Send the selected Memory keyer content.
• M1 ~ M8 and the contents are highlighted orange.
• Holding down for 1 second to repeatedly send the con-
tents.
• Set the repeat interval in the "Keyer Repeat Time" item
of the Keyer set screen.
• To cancel sending the content, push any function key.
Count up trigger
The contest number counter advances each time the
contents are sent. The counter is 4 digits.
• The count up trigger can be assigned in the Keyer 001
screen. (p. 5-12)
• The arrow icon indicates the assigned memory keyer.
In the default setting, Memory keyer M2 is assigned.
• Push [–1](F) to reduce the contest number advances
by one before sending the Memory keyer contents to a
station a second time.
y
After your transmission is finished, returns to re-
ceive.
• Push [TRANSMIT].
u
Push [EXIT/SET].
• Exits the Memory keyer screen.
✔
For your convenience
When an external keypad or PC keyboard is connect-
ed, the preset contents, M1 ~ M4 or M5 ~ M8, can
be transmitted without selecting the Memory keyer
screen.
See pages 3-6 and 15-16
(p. 5-13)
for details.
[TRANSMIT]
(F) Function keys
• Memory keyer screen (SEND)
• Functions in the Memory keyer screen
Function
Push
M1 ~ M8
Hold down
Reduces the contest number counter ad-
vances by one.
–1
• You can change or reset the number in the
Keyer 001 screen.
Selects the Memory bank.
1–4/5–8
• Toggles between M1 ~ M4 and M5 ~ M8.
5-10
Mode keys [EXIT/SET]
Action
Sends the Memory keyer con-
tent.
Repeatedly sends the Memory
keyer content.