Icom IC-7600 Instruction Manual page 174

12
CONTROL COMMAND
D Command table (continued)
Cmd. Sub Data
cmd.
1C 00
01
02
03 see p. 166 Read transmit frequency
04
1E 00
01 see p. 168 Read TX band edge frequencies
02
03 see p. 168 Send/read user-set TX band edge
21 00 see p. 168 Send/read RIT frequency
01
02
25 see p. 168 Send/read the Main or Sub band frequency
26 see p. 168 Send/read the selected operating mode and
165
Description
00 Send/read transceiver's status (RX)
When "CI-V Output (for ANT)" (Command:
1C 04) is set to "ON," automatically outputs
when changed.
01 Send/read transceiver's status (TX)
When "CI-V Output (for ANT)" (Command:
1C 04) is set to "ON," automatically outputs
when changed.
00 Antenna tuner OFF (through)
01 Antenna tuner ON
02 Tuning
00 Send/read transmit frequency monitor setting
OFF
01 Send/read transmit frequency monitor setting
ON
When "CI-V Output (for ANT)" (Command:
1C 04) is set to "ON," automatically outputs
when changed.
00 Send/read command to disable to output the
antenna controller status (frequency and so
on) from [REMOTE].
01 Send/read command to enable to output the
antenna controller status (frequency and so
on) from [REMOTE].
Read number of available TX frequency band
Read number of user-set TX frequency band
frequencies
00 Send/read RIT setting is OFF
01 Send/read RIT setting is ON
00 Send/read ∂TX setting is OFF
01 Send/read ∂TX setting is ON
filter