Daily Timer Setting - Icom IC-7600 Instruction Manual

■ Daily timer setting

The transceiver turns power ON and/or OFF
automatically on the specified day and time, with the
specified frequency settings.
q Push [EXIT/SET] several times to close multi-
function screen, if necessary.
w Push [SET] (F-6) to select the set mode menu
screen.
e Push [TIME] (F-4) to select the time set mode.
r Push [TIMER] (F-2) to select the timer set mode.
t Push one of [TIMER1] (F-1) to [TIMER5] (F-5) to
select the desired timer.
y Rotate the main dial to select the timer action ON
or OFF.
u Push [≈] (F-2) to select the "DAY" cell, then rotate
the main dial to select the desired day of the week.
• Select "– – –" not to specify the day of the week. The
timer will function every day in this case.
• Once a day of the week is selected, push [CLR] (F-4)
to select "– – –."
i Push [≈] (F-2) to select the "REPEAT" cell, then
rotate the main dial to select the repeat function
ON or OFF.
• ON : The timer functions every selected day of
the week (repeats).
• OFF : The timer does not repeat.
o Push [≈] (F-2) to select the "ON" cell, then rotate
the main dial to set the desired transceiver power
ON time.
• When using power OFF timer only, push [CLR] (F-4)
to select "– – – –." This setting cannot be set when the
power OFF timer is set to "– – – –."
!0 Push [≈] (F-2) to select the "OFF" cell, then rotate
the main dial to set the desired transceiver power
OFF time.
• When using power ON timer only, push [CLR] (F-4) to
select "– – – –." This setting cannot be set when the
power ON timer is set to "– – – –."
!1 Push [≈] (F-2) to select the "Mch" cell, then rotate
the main dial to select the desired memory channel
number.
• If using the currently set VFO condition, push [CLR] (F-4)
to select "– – –."
!2 Push [SET] (F-6) to set the timer.
• The timer indicator appears.
!3 Repeat steps t to !2 to set other timers, if desired.
!4 Push [EXIT/SET] to exit timer set screen.
CLOCK AND TIMERS
TIMER1 TIMER2 TIMER3 TIMER4
F-1 F-2 F-3
F-2 F-4
TIMER TIME
• Timer set mode screen
• During [Timer1] is selected
F-1 F-2 F-4
CLR
TIMER5 SET
F-4 F-5 F-6
Main dial
EXIT/SET
F-6
SET
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
124