Icom IC-7600 Instruction Manual page 148

10
SET MODE
Others set mode (Continued)
■
RTTY Shift Width
Selects the RTTY shift width. There are 3 selectable
values: 170, 200 and 425 Hz. (default: 170 Hz)
170 Hz is automatically selected when the internal
RTTY decoder is used.
RTTY Keying Polarity
Selects the RTTY keying polarity. Normal or reverse
keying polarity can be selected. (default: Normal)
When reverse polarity is selected, Mark and Space
are reversed.
PSK Tone Frequency
Selects the desired PSK tone frequency for the PSK
reception between 1000, 1500 and 2000 Hz.
(default: 1500 Hz)
SPEECH Language
Selects the speech language from English and
Japanese. (default: English)
SPEECH Speed
Selects the speech speed from HIGH (faster) and
LOW (slower). (default: HIGH)
SPEECH S-Level
The IC-7600 speech processor can announce
frequency, mode and signal level. Signal level
announcement can be deactivated if desired.
(default: ON)
When "OFF" is selected, the signal level is not
announced.
SPEECH [MODE] Switch
Selects the operating mode speech capability when
a mode switch is pushed. (default: OFF)
[SPEECH/LOCK] Switch
Selects the [SPEECH/LOCK] switch action.
(default: SPEECH/LOCK)
139
170
Normal
• Normal : Key open/close = Mark/Space
• Reverse : Key open/close = Space/Mark
1500
English
HIGH
ON
• OFF : Signal level is not announced. (Operating
frequency and mode are announced.)
• ON : Signal level, operating frequency and mode
is announced.
OFF
• OFF : Operating mode speech capability OFF
• ON : Operating mode speech capability ON
The selected operating mode is verbally
announced when a mode switch is pushed.
SPEECH/LOCK
• SPEECH/LOCK : (Push) The voice synthesizer
function is activated.
(Hold down) The dial lock
function is turned ON or OFF.
• LOCK/SPEECH : (Push) The dial lock function is
turned ON or OFF.
(Hold down) The voice
synthesizer function is activated.