D Selecting In The Memory Screen; Entering Memory Channel Contents; D Entering In The Vfo Mode; D Entering In The Memory Mode - Icom IC-7300 HF Plus Full Manual

Previous view
9
MEMORY OPERATION
Memory channel selection (Continue)

D Selecting in the MEMORY screen

1. Open the MEMORY screen.
» MEMORY
MENU
2. Select the desired memory channel by rotating
and then pushing
MULTI
(Example: memory channel 2)
Memory channel 2 is selected

Entering memory channel contents

You can enter memory channel contents in either the VFO mode or the Memory mode.

D Entering in the VFO mode

[Example: Entering 7.088 MHz, LSB, into memory
channel 2]
1. Push to select the VFO mode.
V/M
• "VFO A" or "VFO B" is displayed.
2. Set the frequency, operating mode and filter.
3. Push or to select the channel to enter.
▲ ▼
• "BLANK" is displayed if the selected channel has no
contents.
L If the selected channel was previously entered,
the contents will be overwritten.
4. Touch the channel number.
L You cannot touch the channel number when the Mini
scope screen or expanded screen is displayed.
• The VFO/MEMORY screen is displayed.
5. Touch [MW] for 1 second to save the entered
contents into the selected channel.
• "BLANK" disappears or the selected channel's
contents are overwritten.
.
Rotate
Push

D Entering in the Memory mode

[Example: Entering 21.280 MHz, USB, into memory
channel 3]
1. Push to select the Memory mode.
V/M
2. Push or
▲ ▼
• "BLANK" is displayed if the selected memory channel
has no contents.
L If the selected channel is previously entered, the
contents will be overwritten.
3. Set the desired frequency, operating mode, and
filter. (p. 3-3)
4. Touch the channel number.
• The VFO/MEMORY screen is displayed.
5. Touch [MW] for 1 second to save the entered
contents into the selected channel.
• "BLANK" disappears or the selected channel's
contents are overwritten.
9-3
to select the channel to enter.