Icom IC-7600 Instruction Manual page 152

10
SET MODE
Others set mode (Continued)
■
CI-V Output (for ANT)
Enables to output the antenna controller status
(frequency and so on) from [REMOTE].
USB Serial Function
Selects the [USB] connector output data format
between CI-V and Decode. (default: CI-V)
Decode Baud Rate
Selects the data transmission speed (Baud rate)
when "Decode" is selected in "USB Serial Function."
The settings are 300, 1200, 4800, 9600 and
19200 bps. (default: 9600)
Keyboard Type
Selects the connected keyboard type between
English, Japanese, United Kingdom, French, French
(Canadian), German, Portuguese, Portuguese
(Brazilian), Spanish, Spanish (Latin American) and
Italian. (default: English)
Keyboard Repeat Delay
Sets the time period for delay between 100 to
1000 milliseconds in 50 millisecond steps.
(default: 250 ms)
When a keyboard key is held down for the set
period, the character is input continuously.
Keyboard Repeat Rate
Sets the repeating rate for the keyboard within 2.0 to
30.0 cps. (default: 10.9 cps)
*cps=character per second
When a keyboard key is held down, the character is
repeatedly input with the set speed.
143
OFF
• OFF : Turns OFF the function.
• ON : Outputs the status.
CI-V
• CI-V : Outputs data in CI-V format.
• Decode : Outputs decoded contents in ASCII code
format.
9600
English
250ms
10.9cps
• Available repeating rate
2.0, 2.1, 2.3, 2.5, 2.7, 3.0, 3.3, 3.7, 4.0, 4.3, 4.6,
5.0, 5.5, 6.0, 6.7, 7.5, 8.0, 8.6, 9.2, 10.0, 10.9,
12.0, 13.3, 15.0, 16.0, 17.1, 18.5, 20.0, 21.8, 24.0,
26.7, 30.0