System Status Messages In Line 22 - Fujitsu BS2000 SE Series Operating Manual

Operating the service processor

4.2.1 System status messages in line 22

.... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0
Cluster ID
HOST/GUEST
Figure 2: Format of the status display in line 22
Meaning of the status information in line 22:
Column Icon
17 - 20
22 - 26
28 - 32
34 - 38
40 -45
47 - 55
58 -80
U41859-J-Z126-2-76
1 2
CL-n
CPU-n
HOST
GUEST
Target CPU
Target CHP
Rate control
Meaning
CL -n Cluster ID of the Server Unit (n = 0 - 3)
none The system is operated in BS2000-NATIVE mode
HOST The selected CPU is occupied by the VM2000 monitor system
GUEST The selected CPU is occupied by a VM2000 guest system
CPU - n Display of the selected CPU (n = 0 - F); selection with [PF16]
CHP - 0 Display of the channel processor CHP - 0.
none The system is in the normal status
CLKSTP The system is in the clock-stop status
I-STEP The system is in the instruction step mode
H-STOP The system is in the hardware stop status
SYS-DOWN The system is in the system down status
CL-STOP The cluster is in the clock stop status
CHK-STOP The selected CPU is in the CHECK stop status
COMP-STOP The address comparison stop mode is active and the selected CPU is
in the address comparison stop status
STOP The selected CPU is in the stop status
WAIT The selected CPU is in the wait status
LOAD An IPL is executed via the selected CPU
RUN The selected CPU is in the run status
none The system is in the run status
PSW = The system is in the stop status on the PSW address (PSW=Program
Status Word)
3 4
SYS-DOWN
CHP-0 CLKSTP
CL-STOP
I-STEP
CHK-STOP
H-STOP
COMP-STOP
STOP
WAIT
LOAD
RUN
General SVP frame structure
5 6
PSW = xxxxxxxx xxxxxxxx
PSW content
Systemstatus
7 8
15