Chapter 3 Dynamic Reconfiguration Messages; Messages Concerning Incomplete System Environment; Messages Concerning Trouble That Occurs In Dr Command - Fujitsu PRIMEQUEST 2000 Series Message Reference

Dynamic Reconfiguration Messages
CHAPTER 3
This section lists the DR messages and contains information on how to respond to them.
3.1

Messages concerning incomplete system environment

dr-util:ERR:101: No space left on device.
Meaning:
There's no disk free space.
Corrective action:
Failed to gather information because the disk free space is insufficient. Please execute the command again
after securing the disk free space.
dr-util:ERR:%d:%s
[%d: 102-103]
Meaning:
Error <%s> occurred
Corrective action:
The error occurred while gathering information. Please execute the command again after removing the error
factor.
3.2 Messages concerning trouble that occurs in DR
command
dr-util:ERR:201: Another DR command is running (pid %d).
Meaning:
Another DR command is running. Its process ID is %d.
Corrective action:
DR command cannot run concurrently. Please execute it again after already-running DR command (Process
ID is %d) ends.
In case there's no process whose Process ID is %d, or in case the process whose Process ID is %d is not
the process of DR command, please delete the /var/log/dr.pid file.
dr-util:ERR:%d: Cannot confirm DR command status.
[%d: 202-204]
Meaning:
The state of the DR command cannot be confirmed. The DR command was aborted because the state of the
DR command was not able to be confirmed.
Corrective action:
Please execute the command again. When the improvement is not seen even if it is executed again, please
gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side, and
contact the technology of our company member
dr-util:ERR:205 Must be root for dr operations.
Meaning:
Only the user with root permission can do DR operation.
Corrective action:
The user without root permission tried to execute the DR command. Please execute it again by the user with
root permission
dr-util:ERR:%d: This operation is prohibited.
[%d: 206-209]
Meaning:
This operation is prohibited.
Corrective action:
SB hot plug operation via DR command is not allowed. Please do SB hot plug via MMB UI.
Dynamic Reconfiguration
Messages
203
CA92344-0540-06