Table of Contents
Advertisement
ENTER/EXIT PROGRAMMING MODE
GS1 DataBar Expanded Length Control
This feature specifies either variable length decoding or fixed length decoding for the
GS1 DataBar Expanded symbology.
Variable Length:
Fixed Length:
$CXBLC00
GS1 DataBar Expanded Length Control = Fixed Length
GS1 DataBar Expanded Set Length 1
This feature specifies one of the bar code lengths for "
Control" on page 114
or the first fixed length if in Fixed Length Mode. Length includes the bar code's data
characters only.
The length can be set from 1 to 74 characters. See "
detailed programming instructions.
Select GS1 DataBar Expanded Set Length 1 Setting
$CXBL1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
114
GRYPHON™ GFS4500
For variable-length decoding, a minimum length may be set.
For fixed-length decoding, two different lengths may be set.
. Length 1 is the minimum label length if in Variable Length Mode,
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Length 1 = 01 (one character)
GS1 DataBar Expanded Length Control
= Variable Length
$CXBLC01
GS1 DataBar Expanded Length
Set Length 1" on page 241
Appendix E, Keypad
CANCEL
1D SYMBOLOGIES
for more
represent-
Advertisement
Table of Contents
