In-Store Label Minimum Reads - Datalogic Magellan 2200VS Reference Manual

In-Store Label Minimum Reads

240
Specifies the minimum number of consecutive times an In-Store
must be decoded before it is accepted as a good read.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option below or on the
following pages. You'll need to cover any unused bar codes on facing
pages to ensure that the scanner reads only the bar code you intend
to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
1. Instore labels are defined as UPC-A labels with a number-system character of 2 or 4 as well as
EAN-8 and EAN-13 labels with a Flag1 character of 2 or an EAN-13 label starting with the three
characters '980'.
IN-STORE MINIMUM READS = 1
IN-STORE MINIMUM READS = 2
®
Magellan 2200VS/2200VS and 2300HS/2300HS
1
label