CHAPTER 3
CONFIGURATION WITH BAR CODES
This and following sections provide programming bar codes to configure your reader by
changing the default settings. For details about additional methods of programming,
see "
Customizing Configuration Settings" on page 12
CONFIGURATION PARAMETERS
Once the reader is set up, you can change the default parameters to meet your applica-
tion needs. Refer to
order to set the default values and select the interface for your application.
The following configuration parameters are divided into logical groups, making it easy to
find the desired function based on its reference group.
Interface Configuration:
•
•
•
•
Parameters common to all interface applications:
•
•
•
NOTE: You must first enable your Gryphon to read bar codes in order to use
this section. If you have not done this, go to Setup, starting on page 5 and
complete the appropriate procedure.
Standard Defaults, starting on page 259
NOTE: In the following sections, text shown with a green star indicates a
factory default value.
RS-232 Standard Settings, starting on page 19
RS-232/USB-COM Settings, starting on page 24
Keyboard Interface, starting on page 31
USB-OEM Interface, starting on page 58
Global Prefix/Suffix, starting on page 61
Data Format, starting on page 60
Host system by selecting parameters to control the message strings sent to the
handheld.
Reading Parameters, starting on page 71
indicators status functioning.
.
This is an example of a default value.
gives options to control the messages sent to the
controls various operating modes and
for initial configuration in
PRODUCT REFERENCE GUIDE
15