Ram Clear & Memory Allocation - Sam4s ER-380M Operation And Program Manual

Ram Clear & Memory Allocation
ER380
1. Turn the key to the S mode and power on the register whilst holding down the
CHEQUE key. Then press the top left, bottom left, top right and bottom
right keys to start the memory allocation procedure.
If you want to allocate memory by default value, Press CASH key only,
Alternatively:
Refer to the chart below . Enter the index number and press the X/TIME key.
X X/TIME
X MEMORY ITEM
1
PLU
2
CLERK
3
GROUP
4
CHECK#
5
SOFT CHECK LINE
6
CHECK TYPE : Hard(1), Soft(0)
7
PRICE LEVEL
8
MIX AND MATCH
9
ELECTRONIC JOURNAL
Note:- ***The number of clerks must be equal to or less than the number of check#
details entered in file 4.
2. Enter the Number to allocate for the Memory Item and Press CASH key.
See the example data table below
N CASH
MEMORY ITEM
PLU
CLERK
GROUP
CHECK #
SOFT CHECK LINE
CHECK TYPE
PRICE LEVEL
MIX AND MATCH
ELECTRONIC JOURNAL
Default Memory Allocation
3. If you want to finish memory allocation, Enter CASH key with no numeric key
input. And if you want to allocate another memory area, Repeat the file number
entry sequence.
N
300 (Max.5000)
10 (Max. 99)
20 (Max. 99)
15 (Max. 500)
30 (Max. 100)
0(Soft Check), 1(Hard Check)
1 (Max. 2)
10 (Max. 99)
3000(Max. 15000)
Service Mode Programming • 69