Employee Programming
1. Move the key to the P lock position to display the Program Mode menu.
2. With the first option, "PLU" displayed, use the CHARGE1 and the CHARGE2
3. Enter the clerk number of the employee you wish to program and press CASH.
4. Use the CHARGE1 and the CHARGE2 keys to select the Employee option you
5. Press the CLEAR key to finalize and return to the ENTER CLERK# screen.
Clerk Programming - Reference Information
Option
1
NAME
2
PASSWORD
3
TRAIN CLERK
4
ALLOW X REPORTS Y or N
5
ALLOW Z MODE
6
ALLOW P MODE
7
ALLOW S MODE
8
ALLOW VOID
MODE
Sam4s ER-260EJ/256EJ OP Manual v1.20
keys to select "5.EMPLOYEE" (or press 5 to go to the option directly.) Press CASH
to view the Employee selection screen.
ENTER CLERK #
(1-10)
wish to program. Use the table below for reference. Make changes as necessary.
Entry
Alpha numeric
16 character
6-digit number
Y or N
Y or N
Y or N
Y or N
Y or N
0
Description
You can program a descriptor for each clerk. The name you
program will print on the receipt in place of the default
CLERK #1-99. Type the descriptor using the Program Overlay
or by using the descriptor code method (see page 104.) The
overlay is automatically activated when the cursor is pointing
at the DESC field.
If you are using a direct or code entry clerk system. The
number set here is the number you must use to sign on or out.
Set to Y if you wish to be training clerk.
If Y, if clerk can use X Reports menu.
If Y, if clerk can use Z mode.
If Y, if clerk can use P mode.
If Y, if clerk can use S mode.
If Y, if clerk can use VOID mode.
Program Mode Programming • 155