Employee Programming; Clerk Programming - Reference Information - Sam4s ER-260EJ Operating And Programming Manual

Employee Programming

Clerk Programming - Reference Information

Option
NAME
PASSWORD
TRAIN CLERK
ALLOW X
REPORTS
ALLOW Z MODE
ALLOW P MODE
ALLOW S MODE
ALLOW VOID
MODE
158 • Program Mode Programming
1. At the PROGRAM MODE menu, press 5 and CASH for EMPLOYEE.
The CLERK NUMBER screen displays:
ENTER CLERK #
(1-10)
2. Press the clerk number and CASH.
3. Press the key and the
Select the Employee option you wish to program.
4. Press the key for YES and the
confirm the option value and return previous screen.
5. Press the CLEAR key to finalize and return to the ENTER CLERK# screen.
Entry Description
Alpha You can program a descriptor for each clerk. The name
numeric you program will print on the receipt in place of the default
16 character CLERK #1-99. Type the descriptor using the Program
Overlay or by using the descriptor code method (see page
110.) The overlay is automatically activated when the
cursor is pointing at the DESC field.
6 digit If you are using a direct or code entry clerk system. The
number number you set here is the number you must use to sign on
or clock in/out. If using an optional card reader, you must
swipe the employee card at this field.
Y or N Set to Y if you wish to be train clerk.
Y or N
If Y, you can use X Reports menu.
Y or N If Y, you can use Z mode.
Y or N
If Y, you can use P mode.
Y or N If Y, you can use S mode.
Y or N
If Y, you can use VOID mode.
0
key to select menu and press the CASH key to confirm.
key for NO. Press the CASH to
SAM4S ER-260EJ Manual