Programming Straight Percentage Tax Rate; Tax Programming - Sam4s NR-300 Series Operator's Manual

Programming Straight Percentage Tax Rate

The NR-300 Series has the capability to support four separate taxes.
Taxes can be calculated as either a straight percentage rate of between .001% and 99.999%, or a 60 break
point tax table. Each tax may be either an add-on tax (added to the cost of a taxable item), or a value added
tax (VAT) that is included in the price of the item.
 If you are entering a tax rate (add-on or VAT), see "Straight Percentage Tax Rate Programming"
to enter the percentage rate.
 If you are entering a tax table, see "Tax Table Programming" to enter the tax break points.
accurately, contact your dealer for assistance.

Tax Programming

PROGRAM MODE
2. SALES TAX
SALES TAX
0. TAX 1
TAX1
TAX1 ADD-ON
ADD-ON
Current TAX1 is programmed by "ADD-ON" option.
If you want to change TAX SYSTEM to VAT or TAX TABLE, select othe option
by " ↑ " or " ↓ " key. And enter CASH key.
NOTE) If you don't want to change or to select next option, Enter Only CASH key.
TAX1 ADD-ON
VAT
TAX1 ADD-ON
TAX TABLE →
TAX1
RATE
22 • Getting Started
Enter CASH key
Enter CASH key
* Description Program
- Use Alpha-Overlay or Code Entry Method.
TAX1
- If you not change the description, Enter only CASH key.
→
→
Enter tax rate and input CASH key to finish TAX
0.000
SAM4s NR-300 Series Operator's & Programming Manual v.1.0