Straight Percentage Tax Rate Programming - Sam4s ER-900 Series Operator's And Programming Manual

Straight Percentage Tax Rate Programming

When tax requirements may be met using a straight percentage rate, use the following
method to program a tax as a straight percentage.
Important Note: Tax program procedures were updated at software version 1.019. At
this version it is no longer necessary to have multiple tax shift keys on the keyboard
when multiple taxes are used: all tax programming is done through the TAX 1 key.
Please use the appropriate instructions for the version you are programming.
Programming Straight Percentage Tax Rates and Status (Up to v1.017)
1. Turn the control lock to the PGM position.
2. If the tax is a percentage rate, enter the tax rate with a decimal. (0.000-99.999). It is
3. Enter 00. (Entries here set tax options for value added tax and or Canadian GST.
4. Press the appropriate Tax key for the tax you are programming.
5. Press the CASH key to end programming.
Tax Rate Programming Flowchart
Programming Straight Percentage Tax Rates and Status (v1.019 or later)
Tax Rate Programming Flowchart
You must enter decimal
SAM4s ER-900 Series Operator's & Programming Manual v.1.39
not necessary to enter preceding zeros, but you must enter the decimal. For example,
for 6%, enter 06.000 or 6.000.
See "Straight Percentage Tax Rate Programming" on page 121 for details.)
.
Tax Rate
You must enter decimal
1. Turn the control lock to the PGM position.
2. If the tax is a percentage rate, with a decimal. (0.000-99.999). It is not
necessary to enter preceding zeros. For example, for 6%, enter 06.000 or 6.000.
3. Enter 00. (Entries here set tax options for value added tax and or Canadian GST.
See "Straight Percentage Tax Rate Programming" on page 121 for details.)
5. Enter the number (1-4) of the tax you are programming.
6. Press the TAX 1 key.
7. Press the CASH key to end programming.
.
Tax Rate
0 0 TAX 1
0 0 TAX 1
Tax#
(1-4)
CASH
CASH
Getting Started • 29