Install Mounting Brackets - Sun Microsystems Server X4-2 Installation Manual

2. To prevent the rack cabinet from tipping during the installation, fully extend
the rack cabinet's anti-tilt legs or anti-tilt bar, which are located at the bottom
front of the rack cabinet.
3. If there are leveling feet beneath the rack cabinet to prevent it from rolling,
extend these leveling feet fully downward to the floor.
Related Information
"Safety Precautions When Rackmounting the Server" on page 41
■
"Preparing for Server Installation" on page 5
■
Your rack cabinet documentation
■
Sun Server X4-2 Safety and Compliance Guide
■

▼ Install Mounting Brackets

To install the mounting brackets onto the sides of the server:
1. Position a mounting bracket against the chassis so that the slide-rail lock is at
the server front, and the five keyhole openings on the mounting bracket are
aligned with the five locating pins on the side of the chassis.
44 Sun Server X4-2 Installation Guide • February 2014