Stabilize The Rack For Installation - Sun Microsystems Server X4-2 Installation Manual

Tool-less Rackmount Kit Contents
FIGURE:
Figure Legend
1 Slide-rails
2 Mounting brackets
3 Four M4 x 5 fine-pitch mounting bracket securing screws (optional)
4 Installation card
Related Information
"Rack Requirements" on page 40
■

▼ Stabilize the Rack for Installation

Caution – To reduce the risk of personal injury, stabilize the rack cabinet, and
extend all anti-tilt devices before installing the server.
Refer to your rack documentation for detailed instructions for the following steps.
1. Open and remove the front and rear doors from the rack cabinet.
Note – The front and rear doors need to be removed only if they impinge on the
mounting bay.
Installing the Server Into a Rack 43