Configure The Preinstalled Oracle Linux 6.X Operating System - Sun Microsystems Server X4-2 Installation Manual

Worksheet for Oracle Linux Operating System Configuration (Continued)
TABLE:
Required Installation Information
Network configuration (if you are
not using DHCP)
Related Information
"Configure the Preinstalled Oracle Linux 6.x Operating System" on page 161
■
▼ Configure the Preinstalled Oracle
Linux 6.x Operating System
After you have completed the configuration worksheet, use the following procedure
to configure the preinstalled Oracle Linux Operating System.
1. If you are not already logged in to Oracle ILOM, log in either locally from a
serial connection, or remotely from an Ethernet connection.
See
2. Power on or restart the server, as follows:
■
Description
Supply the IP address for the server.
Example: 172.16.9.1
If the server is part of a subnet, supply the
netmask of the subnet.
Example: 255.255.255.0
If the server is accessed through a gateway,
supply the IP address of the gateway.
Supply the IP address for the domain name
server (DNS). Only one DNS is required.
"Connecting to Oracle ILOM" on page
To power on the server, use one of the following methods:
From the Oracle ILOM web interface System Information page, click Host
■
Management > Power Control, and in the Select Action list box, click Power
On.
From the Oracle ILOM CLI, type the following command from the prompt:
■
-> start /System
When prompted, type y to confirm:
Are you sure you want to start /System (y/n)? y
Starting /System
Configuring the Preinstalled Oracle Linux 6.x Operating System
Your Answers
81.
161