Registering Oracle Linux And Activating Automatic Update; Oracle Linux 6.X Operating System Documentation - Sun Microsystems Server X4-2 Installation Manual

■
■
■
■
■
8. When configuration is complete, end your console session using one of the
following methods:
■
■
Registering Oracle Linux and Activating
Automatic Update
After configuring Oracle Linux, you should register your system and activate your
subscription with Oracle to receive automatic updates to the software. This will
ensure that the server is running the latest version of the operating system. For
instructions, go to:
http://www.oracle.com/technetwork/articles/servers-storage-admin
/yum-repo-setup-1659167.html
Oracle Linux 6.x Operating System
Documentation
Oracle Linux 6 operating system documentation is available from the Oracle
documentation web site at:
http://docs.oracle.com/cd/E37670_01/index.html
164 Sun Server X4-2 Installation Guide • February 2014
For security, change the factory default password for root
Configure your server for the network (if DHCP is not used). See
6.x Configuration Worksheet" on page
Configure a proxy, as needed, for Internet access.
Register and update your server. See
Automatic Update" on page
Install desired packages.
From the Oracle ILOM web interface, close the Remote Console window and
log out of Oracle ILOM.
From the Oracle ILOM CLI, press the Esc key followed by the "(" character
(Shift+9), then log out of Oracle ILOM.
160.
"Registering Oracle Linux and Activating
164.
"Oracle Linux