Use The Oracle Ilom Web Interface For Immediate Shutdown; Reset The Server; Use The Oracle Ilom Cli To Reset The Server - Sun Microsystems Server X4-2 Installation Manual

▼ Use the Oracle ILOM Web Interface for
Immediate Shutdown
1. Log in to the Oracle ILOM web interface using an Administrator account.
The Oracle ILOM web interface System Information > Summary page appears.
2. In the left pane, click Host Management > Power Control, and in the Select
Action list box, click Immediate Power Off.
3. Click Save, and then click OK.
The server powers down immediately to standby power mode.
4. To completely power off the server from standby power mode, disconnect the
power cables from the server.
The server powers down completely.
Related Information
"Use the Power Button for Immediate Shutdown" on page 176
■
"Use the Oracle ILOM CLI for Immediate Shutdown" on page 176
■

Reset the Server

It is not necessary to power the server off and on to simply reset (power cycle) the
server. Use the procedures in one of the following sections to reset the server.
Caution – This method will cause any unsaved data on the server to be lost; for
example, this procedure might corrupt the server file systems.
"Use the Oracle ILOM CLI to Reset the Server" on page 177
■
"Use the Oracle ILOM Web Interface to Reset the Server" on page 178
■

▼ Use the Oracle ILOM CLI to Reset the Server

1. Log in to the Oracle ILOM SP command-line interface (CLI) using an
Administrator account.
Oracle ILOM displays the default command prompt (->), indicating that you have
successfully logged in to Oracle ILOM.
Controlling System Power 177