Optional Component Installation - Sun Microsystems Server X4-2 Installation Manual

Optional Component Installation

Standard system components are installed at the factory. Optional components that
you purchased independent of the standard configuration are shipped separately,
and in most cases should be installed before you install the server in a rack.
The following optional components can be ordered and purchased separately:
PCIe cards
■
DDR3 DIMM memory kits
■
Storage drives
■
Software media
■
If you ordered any options that are not factory installed, refer to
Service Manual, "About System Components" on page
Supported components and their part numbers are subject to change over time and
without notice. For the most up-to-date list, go to:
https://support.oracle.com/handbook_private/
Note – This site requires an Oracle web account for access.
Click the name and model of your server. On the product page that opens for the
server, click Full Components List for a list of components.
If you ordered any options that are field-replaceable units (FRUs) or
customer-replaceable units (CRUs), refer to the service label on the top cover of the
server or the component removal and replacement procedures in the
Service Manual, "About System Components" on page 16
Related Information
"Server Components" on page 20
■
Sun Server X4-2 Service Manual, "About System Components" on page 16
■
18 Sun Server X4-2 Installation Guide • February 2014
Sun Server X4-2
16.
Sun Server X4-2
for installation instructions.