Configure The Preinstalled Oracle Solaris 11.1 Operating System; Configure The Preinstalled Oracle Solaris - Sun Microsystems Server X4-2 Installation Manual

▼ Configure the Preinstalled Oracle
Solaris 11.1 Operating System
After you have completed the configuration worksheet, use the following procedure
to configure the preinstalled Oracle Solaris 11.1 operating system.
1. If you are not already logged in to Oracle ILOM, log in either locally from a
serial connection, or remotely from an Ethernet connection.
See "Connecting to Oracle ILOM" on page
2. Power on or restart the server, as follows:
To power on the server, use one of the following methods:
■
From the Oracle ILOM web interface System Information page, click Host
■
Management > Power Control, and in the Select Action list box, click Power
On.
From the Oracle ILOM CLI, type the following command from the prompt:
■
-> start /System
When prompted, type y to confirm:
Are you sure you want to start /System (y/n)? y
Starting /System
To restart the server, use one of the following methods:
■
From the Oracle ILOM web interface System Information page, click Host
■
Management > Power Control, and in the Select Action list box, click Reset.
From the Oracle ILOM CLI, type the following command from the prompt:
■
-> reset /System
When prompted, type y to confirm:
Are you sure you want to reset /System (y/n)? y
Serial console started.
The server begins the boot process.
3. Start the host console using one of the following methods:
From the Oracle ILOM web interface, click Remote Control > Launch Remote
■
Console.
From the Oracle ILOM CLI, type:
■
-> start /HOST/console
Configuring the Preinstalled Oracle Solaris 11.1 Operating System
81.
155