Reset The Service Processor Using Oracle Ilom; Reset The Service Processor From The Server Back Panel - Sun Microsystems Server X4-2 Installation Manual

As the system administrator, you have forgotten the root account password and
■
you need to recover it.
For instructions on how to handle each of these problems, see the following sections:
"Reset the Service Processor Using Oracle ILOM" on page 98
■
"Reset the Service Processor From the Server Back Panel" on page 98
■
"Recover Root Account Password" on page 99
■

▼ Reset the Service Processor Using Oracle ILOM

●
If the Oracle ILOM service processor (SP) is hung, use one of the following
methods to reset it:
■
■
Note – Resetting the Oracle ILOM SP disconnects your current Oracle ILOM session.
You must log in again to continue working in Oracle ILOM.
For more information about resetting the SP from the Oracle ILOM CLI or web
interface, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.1 Configuration
and Maintenance Guide at http://www.oracle.com/goto/ILOM/docs.
▼ Reset the Service Processor From the Server Back
Panel
If the Oracle ILOM SP is hung and you cannot reset it using the Oracle ILOM web
interface or the Oracle ILOM CLI command, use the following procedure to reset the
SP from the server back panel.
●
Using a stylus, press the Reset SP pinhole button that is located on the server
back panel.
98 Sun Server X4-2 Installation Guide • February 2014
From the Oracle ILOM command-line interface (CLI), type: reset /SP.
From the Oracle ILOM web interface, click Administration > Maintenance >
Reset SP.